O3 Sensor Hub

The ceiling-mounted O3 sensor hub is part of the O3 room control system designed for the modern smart building. The sensor hub replaces multiple room sensors with a one-per-room cost-competitive solution when installed together with an O3 room controller.

O3 Sensor Hub R2.7 for Beta requires enteliWEB 4.13 or later

Description
The ceiling-mounted O3-HUB sensor array is part of the O3room control system designed for the modern smart building. The sensor hub replaces multiple room sensors with a one-per-room competitive cost solution when installed together with an O3-DIN room controller.
The sensor hub provides occupant- and location-based control for the modern office or meeting space. Using the O3mobile app, room occupants can select from a list of preconfigured settings or they can interact with the sensor hub directly to manage room comfort. 

Specifications
Temperature Sensors

Composite temperature value± 0.5°C  (± 1.0°F) with calibration
Digital temperature sensor ± 0.5°C  (± 1.0°F)
Infrared temperature sensor ± 1.0°C  (± 1.8°F) typical

Humidity Sensor

Accuracy ± 3% for 20% to 80% RH 
@ 15°C to 30°C (59°F to 86°F)

Motion Sensor

Passive infrared (PIR) motion sensor 
Motion sensing range: 6.7 m (22 ft) diameter @ 3 m (10 ft) mounting height
5.5 m (18 ft) diameter @ 2.4 m (8 ft) mounting height

Light SensorDelta

± (6 + 5% reading) lxDelta

Audio Input

2 microphones for acoustic occupancy detection
LED Ring
Full color articulated with 12 RGB LEDs

Universal Points (2xP models only)
Up to 2 inputs (16-bit), software configurable for the following types:

0–5 VDC
0–10 VDC
10k thermistor
Dry contact (using 10k thermistor 
software setting)
4–20 mA (using external 250 ohm 
resistor on 0–5 V setting)
Up to 2 outputs (12-bit), software configurable for the following types:
0–10 V @ 20 mA max (sourcing)
1–10 V @ 10 mA max (sinking) for 
hardware rev 2.7 and higher