hotline: 0913 85 00 66 (Mr. Thạc)
Chào mừng bạn đến với BMS!
Module giáp sát
Module giáp sát

Module giáp sát

Còn hàng

BEFORE INSTALLING This information is included as a quick reference installation guide. Refer to the control panel installation manual for detailed system information. If the modules will be installed in an existing operational system, inform the operator and local authority that the system will...

Liên hệ

Thương hiệu:

BEFORE INSTALLING
This information is included as a quick reference installation guide. Refer to the control panel installation manual for detailed system information. If the modules will be installed in an existing operational system, inform the operator and local authority that the system will be temporarily out of service. Disconnect power to the control panel before installing the modules.

NOTICE: This manual should be left with the owner/user of this equipment.

GENERAL DESCRIPTION
The M301MJ monitor module can be installed in a single gang junction box directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting (see Figure 1). The M301MJ is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiating device circuit for normally open contact fire alarm and security devices. This module can be used to replace an M501MJ module in existing systems.

COMPATIBILITY REQUIREMENTS
To ensure proper operation, this module shall be connected to a compatible system control panel (list available from Johnson Controls).

FIGURE 1:

M301MJ